Lincoln Electric IM10003 VANTAGE 500-I - Manual (Page 23)

C-1 ACCESSORIES C-1
FIELD INSTALLED OPTIONS /
ACCESSORIES
K2641-2 FOUR WHEELED STEERAbLE YARD
TRAILER
For in plant and yard towing. Comes standard with a
Duo-Hitch™, a 2” Ball and Lunette Eye combination
Hitch.
K2636-1 TRAILER - Two-wheeled trailer with optional
fender and light package. For highway use, consult
applicable federal, state, and local laws regarding
possible additional requirements. Comes standard
with a Duo-Hitch™, a 2” Ball and Lunette Eye combi-
nation hitch. Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
K903-1 SPARK ARRESTOR - Includes a heavy gage
steel, approved spark arrestor, clamp and adapter for
mounting to the muffler exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of
electrode cable and 30 ft. (9.1m) of work cable, head
shield, work clamp electrode holder. Cables are rated
at 400 amps, 100% duty cycle.
K857 25 ft (7.6m) or K857-1 100 ft. (30.4m)
REMOTE CONTROL
Portable control provides same dial range as the out-
put control on the welder. Has a convenient 6 pin plug
for easy connection to the welder.
K2627-2 REMOTE OUTPUT CONTROL WITH 120V
AC RECEPTACLE-Remote output control box with
two 120V AC receptacles having GFCI (Ground Fault
Circuit Interruption) protection. One cord for both
remote and power. 100 ft. (30.5m) length. Permit
remote adjustment of weld output and power for tools
(such as a grinder) at the work. 20 amp capacity.
K1858-1 SERVICE INDICATOR KIT- Provides a GO /
NO-GO visual indication of air cleaner element useful
service life. Filter service based on restriction readings
allows the longest life possible from the filter and best
engine protection.
K2679-1 COLD WEATHER HEATER AND TARP KIT
For engine starting and operation in extreme cold
weather conditions down to -40ºF / -40ºC (with the
use of OW40 synthetic oil and arctic diesel fuel),
includes 120VAC engine block heater, and radiator
grill tarp.
Invertec V275-S
Get a second arc for Stick or DC TIG welding from the
3-phase AC generator power of the Vantage 500-I.
Run 200 amps from the V275-S and 200 amps from
the Vantage 500-I at the same time. Requires
T12153-10 Full-KVA 3-phase plug. See bulletin
E2.161 for Invertec V275-S accessoies including plug
options.
Order K2269-1 (Accepts Twist-Mate™ Plugs)
Order K2269-3 (Accepts Tweco®)
Tweco® is a registered trademark of Thermadyne.
WIRE FEEDER OPTIONS
K2613-1 LN-25 PRO Wire Feeder- Portable CC/CV
unit for flux-cored and MIG welding with MAXTRAC®
wire drive system. Includes gas solenoid and internal
contactor.
K1870-1 LN-15 Across the Arc Wire Feeder.
Portable, lightweight, compact CC/CV unit for flux-
cored and MIG welding. Includes Gas Solenoid,
adjustable flow meter and internal contactor. For 10-
15 lb. (4.5-6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun
K1802-1 Magnum 300 MIG Gun (for LN-25)
K470-2 Magnum 300 MIG Gun (for LN-15, Includes
Connector Kit)
K466-10 Connector Kit (for LN-15, K470-2)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
Note: See Wire Feeder IM manuals for appropriate
Drive Roll and Guide Tubes.
TIG OPTIONS
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with
valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories
you need to start welding. Parts kit provides collets,
collet bodies, a black cap, alumina nozzles and tung-
stens in a variety of sizes, all packaged in an easy to
carry reclosable sack.
K870 Foot Amptrol®
K963-3 Hand Amptrol®
PLASMA CUTTING
K1580-1 Pro-Cut 55
Cuts metal using the 3-phase AC generator power
from the engine driven welder.
VANTAGE® 500-I