ODL Brisa Retractable Screen Doors - single doors - Manual (Page 3)

Flush Sill
Sill is flush with the exterior trim.
Long/Extended Sill
Sill extends past the exterior trim.
SILL TYPE DOOR TYPE
Right/Left Inswing
Screen assembly will mount
on outside of the home.
2
Identify your door type
Before you begin installing your new retractable screen door, it is important to
identify your sill and door type. If you have a short sill or an outswing door, you
may need to make some modifications before proceeding to the installation steps.
Short Sill
Sill stops short of the exterior trim.
*NOTE: Prior to following
the standard assembly
process, you must first
reconfigure the lock/latch.
Go to page 7 to complete
this modification first.
Right/Left Outswing*
Screen assembly will mount
on inside of the home.
• A filler board is not needed
when short sills have ground
directly underneath sill.
• A filler board is needed when
short sill sits on top of a step.
• Cut the filler board and place
under the trim so the top of the
filler board is even with the sill.
Filler Board
Additional steps may be required
Additional steps required