ODL Brisa Retractable Screen Doors - single doors - Manual (Page 7)

6
Insert housing screws into all remaining
pre-drilled holes on each vertical housing
flange (2 total per side). Tighten all screws.
Pull the slider bar closed to verify the
latch and latch hook align properly.
Latch hook can be adjusted as needed
with a hand screwdriver.
TIP: Latch hook can be oriented either
hook up or down to connect with latch.
TIP: For a tailored fit around door
moldings, notch each plastic sill
plate extender using a utility knife.