ODL Brisa Retractable Screen Doors - single doors - Manual (Page 4)

Assembly process
These instructions outline the step-by-step process to install a retractable
screen door. Before starting, review all instructions and become familiar
with the parts included.
STEP 1
ASSEMBLE COMPONENTS
Determine assembly configuration.
The screen housing should be oriented
to the hinge side of the door.
TIP: Place housings face down on
a soft surface to protect the finish
during assembly.
Insert the notch ends
of the tracks into the
screen housing.
Make sure the
screen threads
through the tracks.
MEASURE YOUR
DOOR TRIM OPENING
This screen door is designed to fit door
trim openings between 32" and 36"
without modifications. If your door trim
opening measures less than 32" wide,
the top and bottom tracks will require
cutting. Go to page 7 to complete this
modification first.
Slider
Bar
Bottom
Track
3