Pumptec SPRAYER SUB-ASSEMBLY 350U with regulator - Manual

1
Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614
SPRAYER SUB-ASSEMBLY
350U with regulator
DANGER
Do not pump hazardous materials (flammable, caustic, etc.)
WARNING
Consult an automotive technician (certified to ASE T6 Truck
Electrical/Electronic Systems) for final approval of wiring
installation and electrical components. Improper wiring and/or
use of undersized electrical components can cause equipment
damage, overheating, and result in a fire.
Installation Instructions
WARNING
To reduce risk of electric shock, always disconnect pump
from power source before handling or servicing.
WARNING
Pumps build up heat and pressure during operation. Bleed
pressure lines and allow time for pumps to cool before
handling or servicing. Only qualified personnel should
install, operate, and repair pump
.
Pumptec Inc. is not responsible for losses, injury, or death resulting from a failure to observe these safety precautions, misuse or abuse of
pumps or equipment.
Please read and save these instructions. Read Carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage in which Pumptec, Inc. will not assume any
liability. Retain instructions for future reference.