Pumptec SPRAYER SUB-ASSEMBLY 350U with regulator User Manual
Page 8
8
Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614
-
It is not necessary to wire the pump to the vehicle battery. If you do choose to
wire the pump to your vehicle battery, also consult your vehicle dealership
before making any connections. Pumptec will not be responsible for any damage
or harm to pump, vehicle, or persons resulting from improper installation.
40 Amp fuse
FUSE
Switch rated for at
least 75 Amps
WARNING
Consult an automotive technician (certified to ASE T6 Truck
Electrical/Electronic Systems) for final approval of wiring installation
and electrical components. Improper wiring and/or use of
undersized electrical components can cause equipment damage,
overheating, and result in a fire.