Bolt pump to a mounting plate, Step 1 – Pumptec SPRAYER SUB-ASSEMBLY 350U with regulator User Manual

Page 2

Advertising
background image

2

Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614

-

Choose a location where the pump is protected from
rain and road spray and is less than 6 ft from your
tank.

-

It is best if the pump is located below the lowest water level in your tank
with a downward sloping delivery hose so that the pump inlet is always
flooded.

-

If it is necessary to mount the pump higher, the maximum suction lift is 3 ft
from the bottom of the tank.

-

A foot valve is recommended for all suction-lift applications.



STEP 1

Bolt pump to a mounting plate.

6ft max

distance

3ft max

lift

Foot

valve

Advertising