Qualcraft Aluminum Folding Multi-Function Scaffold User Manual
Page 8
before proceeding. For easier locking and unlocking
of the casters, turn the brake levers outward.
5. One person climbs onto the platform of the
Base scaffold. From the ground, the second
person hands up components of the first stacked section
.
6. Install the two (2) End Frame Access Ladder. First, then install the two (2) side Trusses at the desired platform height. Lock
all four (4) Positive Engagement Locks on the Trusses
7. Install the platform securely within the platform Ledges of the truss channels.
.
8. While moving from one platform to another, it is
neccessary, to carefully step around the End Frame
Access Ladder, to the outside of the ladder. Keep
your body close to the ladder at all times during
this move.
REMEMBER:
All casters in the base
scaffold section and the four outriggers must be locked
prior to this movement. For easier locking and
unlocking of the casters, turn the brake levers outward.
9. Repeat Steps 4-8 if another section is to
be stacked ( not to exceed 3 high ). When
necessary, use a rope to bring up components
from the person on the ground
.