Rapid-Air SERVO FEED: 100C, 100D series - Manual (Page 23)


NEVER – Put screwdrivers or foreign materials in feed rolls
NEVER – Hold onto material as it is being fed through the servo
NEVER – Wear neckties around the servo feed rolls
NEVER – Force the rolls open by prying on them
NEVER – Modify the mechanical aspects of the servo feed
CAUTION – Contact the factory before drilling any holes in the unit
CAUTION – Wear proper eye protection when working around the servo
CAUTION – Do not wear loose clothing around the servo feed rolls
PRECAUTIONS & SAFETy
Precautions & safety