Alpine CDA-W560E - Manual (Page 16)

14
-EN
Cassette Player
Operation
Playback (Cassette)
1
Insert a cassette tape into the slot with the open
side facing right.
The player automatically starts tape playback and the
display shows "TAPE" and the tape side being played
(
or ).
When the end of the tape is reached, the player
automatically reverses the tape direction and plays the
other side of the tape.
• When power is turned off, the full-logic mechanism will
automatically switch to the PAUSE mode. This protects the tape
from being deformed by the pinch-rollers if left for long periods.
• Auto Metal
When a metal cassette tape is inserted, the player automatically
adjusts the equalization for metal or any other high bias tape for
optimum sound.
• When a cassette tape is already inserted, press SOURCE/POWER
to switch to cassette mode. Playback starts.
2
Press g or f to fast rewind or forward the
tape respectively.
The tape side indicator ( or ) blinks and >> or <<
moves indicating the direction of the tape.
When the end of the tape is reached in the fast rewind
mode, the player stops automatically and begins playing
from the beginning of the same side.
When the end of the tape is reached in the fast forward
mode, the player stops automatically and begins playing
from the beginning of the opposite side.
3
Press f during forwarding to stop fast
forwarding and resume tape play.
Press g during rewinding to stop rewinding and
resume tape play.
The tape side indicator stops blinking.
4
Press -/J / ENT. to pause playback.
Press -/J / ENT. again to start playback.
5
Press CST c to eject the cassette tape.
Manual Reverse
Press BAND during tape play to change the direction
of play.
The tape side indicators ( and ) change to show which
side of the cassette is being played.
Dolby B NR (Noise Reduction)
Insert a Dolby B NR encoded tape.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
2
Press / or - to select NR. B mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
The display shows the "N.R.". The tape noise is reduced in
the Dolby NR mode when a Dolby B NR encoded tape is
played.
3
Press / or - to select ON, then press -/J / ENT..
4
To cancel, select NR. B OFF with the above
procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.
Repeat Play
The current programme will be played repeatedly.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
2
Press / or - to select REPEAT mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
FUNCTION/SETUP
BAND
ON OFF
f
g
CST c
/ / -
-/J / ENT.
(* Only when the changer is connected)
FUNCTION SETUP NORMAL
mode mode mode
FUNCTION SETUP NORMAL
mode mode mode
SOURCE/POWER
TUNER TAPE CD CHANGER*