Alpine CDA-W560E - Manual (Page 36)

34
-EN
Specifications
FM TUNER SECTION
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
80 dB
Stereo Separation 45 dB
AM TUNER SECTION
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Dynamic Range 93 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
TAPE PLAYER SECTION
Tape Speed 1-7/8 ips (4.8 cm/sec)±0.7%
Wow & Flutter 0.06%WRMS
Signal-to-Noise Ratio
With Dolby B-TYPE NR
68 dB
Without Dolby NR 60 dB
Frequency Response
With Alpine Test Tape
30-20,000Hz
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Power Output 18 W RMS
× 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and
≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 2V/10 k ohms
Weight
2.2 kg (4 lbs. 14 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 100 mm (3-15/16")
Depth 160 mm (6-1/4")
NOSEPIECE SIZE
Width 170 mm (6-11/16")
Height 96 mm (3-3/4")
Depth 28 mm (1-1/8")
• Due to continuous product improvement, specifications and design
are subject to change without notice.