Alpine CDA-W560E - Manual (Page 21)

19
-EN
7
Press TITLE to record the title.
• You can enter 24 radio station titles and 18 CD titles on this unit. If
you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored.
• Up to 8 characters are allowed for CD changer titles. The number
of titles allowed depends on the CD Changer model.
• To input a new title, one of the previously inputted titles must first
be deleted.
• When you want to erase a title, enter the “ ” symbol into all
spaces.
• The operations described in steps 3 to 6 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.
• Removing power from the unit may delete these titles. Use caution
when manipulating the power cord.
Scroll Setting
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See “About SETUP” on Page 6.
2
Press / or - to select the SCROLL mode.
3
Press -/J / ENT. to switch the scroll setting.
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.
• Scrolling is available only for CD text, folder names, file names,
and tag information.
• When set to AUTO, scrolling is displayed repeatedly.
Erasing Disc Title/Station Title
1
Press TITLE to select the title display mode.
2
Press and hold TITLE for at least 3 seconds.
The first character of the title will blink.
3
Press and hold -/J / ENT. for at least 2 seconds.
The first stored title will blink.
4
Press / or - repeatedly until the title you want to
erase is displayed.
5
Press and hold -/J / ENT. for at least 2 seconds
to erase the title displayed.
6
Press TITLE to cancel the title erasing mode.
• You cannot erase CD-TEXT.
• The operations described in steps 3 to 6 must be made within 10
seconds. The mode will be cancelled if no action is taken for over
10 seconds.
• “NO DATA” is displayed for 2 seconds if the title is not inputted in
step 3, or if all titles are erased in step 5.
Upper case Lower case Numeral/Symbol
Indicator/
Mode
1
2
3
4
5
6
CD
Mode
Title being
displayed
-
-
-
Text (Disc
name) being
displayed
Text (Track
name) being
displayed
MP3/WMA
Mode
-
Folder name
being
displayed
File name
being
displayed
Artist name*
being
displayed
Album name*
being
displayed
Track name*
being
displayed
TUNER
Mode
-
-
-
-
-
Title being
displayed
* Tag information
Titling Discs/Stations
It is possible to title your favourite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press TITLE to select the title display mode.
For details, see Displaying the Title/Text (page 18).
2
Press and hold TITLE for at least 3 seconds.
The first character will blink.
3
Press BAND to select the characters/symbols.
4
Press / or - to select the desired letter/numeral/
symbol available for naming.
5
Press -/J / ENT. to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
6
Repeat the steps 3 and 5 above to complete the
titling. Pressing -/J / ENT. after entering the 10th
character, automatically stores the title into
memory.
When entering a title of less than 10 characters (for
example, 3 character title):
After entering 3 characters to complete your title, the 4th
character space will be blinking. Go to step 7 to complete
the title.
(Initial setting)
SCROLL AUTO SCROLL MANUAL