Wiegmann WPG Series User Manual
Page 28
Advertising
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
K28
E N V I R O N M E N TA L C O N T R O L S
W AV K , W AV K - S S & W A F LT L O U V E R P L AT E K I T S & F I LT E R K I T S
Notes:
Installation Instructions
1. Make sure the proper louver kit and/or filter kit has been ordered.
2. Locate and mark holes and cutout as shown in figure 1.
3. Drill holes using a 7/32" drill bit making sure there are no electrical
wires or internal components in the way.
4. Assemble louver kits and/or filter kits as shown in figure 2.
Note: After installation is complete, make sure louver and filter kits
do not interfere with any internal or external equipment.
Advertising
This manual is related to the following products: