Wiegmann WPG Series - Manual (Page 4)

D ATA S U B J E C T T O C H A N G E W I T H O U T N O T I C E
K4
E N V I R O N M E N TA L C O N T R O L S
M / TA B M O U N T I N G T E M P L AT E A N D A S S E M B LY
F E AT U R E S - S P E C I F I C AT I O N S
Description
A highlight of the Panel-Mounted
TrimLine Series is an easy, revolutionary
system for installing Panel-Mounted
Air Conditioners and Heat Exchangers
onto electronic or electrical enclosures.
The M/TAB is standard on all TrimLine
Air Conditioners. This integral system
functions as a mounting template,
pre-installation hanger and final
assembly bracket.
The M/TAB was specifically designed
to assist in the difficult job of installing
enclosure Air Conditioners. It simplifies
the installation process by eliminating
the problem of handling flange-
mounted Air Conditioners. The solu-
tion is provided by following these
installation steps...
• Use the M/TAB as a template to
drill holes for mounting to the
enclosure
• Bolt M/TAB to enclosure
• Cut out the Supply and Return
openings
• Hang the Air Conditioner or Heat
Exchanger on the M/TAB
• Secure the unit to the M/TAB
The M/TAB also allows for the quick
removal and transportation of the Air
Conditioner or Heat Exchanger, sepa-
rate from the equipment, for servicing
or change to a different capacity
same-size Air Conditioner or to a
same-size Heat Exchanger.
Features
• No exposed rails or mounting
flanges; aesthetically pleasing
while conserving cabinet space
• Reduction in installation time and
labor, with significant cost savings
• Ease of installation and one piece
design reduce mounting errors
• Allows the installer to operate inde-
pendently
• Functions as a pre-installation
hanger and final assembly bracket
• Installation is totally outside the
enclosure; no clumsy mounting
from inside the enclosure
www.hubbell-wiegmann.com
Data Subject To Change Without Notice