Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 21
Advertising
22
Eng
lis
h
Installation
4
Insert the installation fasteners into the GP unit’s insertion slots on
the top and bottom sides. (left and right sides for the GP-4200
Series.) If the fasteners are not correctly attached, the GP unit may
shift or fall out.
5
Slide the fasteners to the back.
6
Use a Phillips screwdriver to tighten each fastener screw and
secure the GP unit in place. The necessary torque is 0.5 Nm (4.4
lb-in).
Installation Panel
Hook
Slots
(GP-4301T)
Slots
(GP-4201T)
Advertising
This manual is related to the following products: