Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 23)

24
Eng
lis
h
Installation
3. Removal Procedures
Step Action
1 Loosen the installation fasteners (4) from the GP unit.
2 Remove the GP unit slowly from the panel while pressing the
projections on the top of the GP unit.
Note :
• You could damage the GP unit if you try and remove it
without holding down the projections.
• Watch your fingers so they do not get caught when holding
down the projections.
CAUTION
RISK OF INJURY
Do not drop the GP unit when you remove it from the panel.
• Hold the GP unit in place after removing the fasteners.
• Use both hands.
Failure to follow the instruction can result in injury or equipment
damage.
(1)
(1)
(1) projections