Watlow ANAWIN 2 - Manual (Page 105)

Using the Developer
AnaWin User’s Guide 10-11
Bevel Style: Use the Bevel Style pull-down list box to select the style of
the bevel that surrounds the field: Lowered or Raised.
Height (Pixels): Use the Height field to enter the height (in pixels) for
the field, then press Enter.
Width (Pixels): Use the Width field to enter the width (in pixels) for the
field, then press Enter.
Top Position: Use this field to enter the top position (the number of
pixels from the top of the screen, under the toolbar) for the field on the
custom overview screen.
Left Position: Use this field to enter the left position (the number of
pixels from the left of the screen) for the field on the custom overview
screen.
Digital I/O Text Properties
Use the Digital I/O Text Properties table, shown in Figure 10-9, to
format text displays of the state of digital input or output.
FIGURE 10-9 Digital I/O Text Properties Table
You can set the following digital I/O text properties:
Controller Type: Use the Controller Type pull-down list box to select
an available controller type.
Controller Name: Use the Controller Name pull-down list box to select
an installed controller of the type selected in the Controller Type list
box.
Digital Type: Use the Digital Type pull-down list box to select whether
the reference is an Input or an Output.
I/O Name: Use the I/O name pull-down list box to select an available I/
O point of the selected Digital Type.
Editing Enabled: Use the Editing Enabled pull-down list box to
specify whether the reference is read-only (False) or user-editable
(True). Inputs and global outputs are not editable.