Watlow ANAWIN 2 - Manual (Page 76)

7-14 AnaWin User’s Guide
Using the Trend Plot Screen
Markers
Click the Markers icon to display the Markers property page, shown in
Figure 7-10. From this page, you can customize the markers bars, and
high-low-close symbols, on your graph. The various options let you set
the color of markers, choose patterns for fills and lines, and select
symbols and their size. Some options are only available for certain
graph types.
FIGURE 7-10 Markers Property Page
Click to Select a Point or Set: When you move the mouse pointer over
the graph drawing at the upper left of the Markers page, the pointer
becomes a large arrow. Point and click on the graph marker to which
you want to apply settings.
Apply to: The Apply to panel lists the set or point number of the graph
object you have selected in the graph drawing, as described above.
• Set: For all graph types except pie, bubble, and bar graphs having one
data set, a Set number is shown. Your settings apply to a particular
data set.
• Point: For pie charts, bubble graphs, and bar graphs having one data
set, a Point number is shown. Your settings apply to a particular data
point.
Reset All: Click Reset All to return all settings in the Markers property
page to their default values.
Color (default is automatic color selection): Use the Color pull-down
list box to choose a color for the selected marker from the current
palette. Use the System property page to choose a palette, as described
under “System,” later in this chapter.
By default, the Graph Control assigns an automatic series of colors to
markers, chosen for variety. If you override this default by setting your
own color for one marker, you have to set colors for the remaining
markers as well; otherwise, they will be shown in black.