Security setting menu – Watlow EZ-ZONE RM-Scanner-Modul User Manual
Page 86
Watlow EZ-ZONE
®
RMS Module
•
83
•
Chapter 5 Factory Page
RM Scanner Module • Factory Page
Display
Parameter Name
Description
Range
Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[SLoC]
[SLoC]
Security Setting
Write Security
Set the write security clear-
ance level. The user can ac-
cess the selected level and all
lower levels.
If the Set Lockout Security
level is higher than the Read
Lockout Security, the Read
Lockout Security level takes
priority.
0 to 5
5
- - - -
- - - -
- - - -
- - - -
- - - -
[loC;l]
[LoC.L]
Security Setting
Locked Access Level
Determines user level menu
visibility when security is
enabled. See Features section
under Password Security.
1 to 5
5
- - - -
- - - -
- - - -
- - - -
- - - -
No Dis-
play
Security Setting
Locked State
Current level of security
Lock (228)
User (1684)
Admin (1685)
- - - -
- - - -
- - - -
- - - -
3023
uint
R
[roll]
[roLL]
Security Setting
Rolling Password
When power is cycled a new
Public Key will be displayed.
[`off]
Off
[``on]
On
Off
- - - -
- - - -
- - - -
- - - -
- - - -
[pas;u]
[PAS.u]
Security Setting
User Password
Used to acquire access to
menus made available through
the Locked Access Level set-
ting.
10 to 999
63
- - - -
- - - -
- - - -
- - - -
- - - -
[pas;a]
[PAS.A]
Security Setting
Administrator Password
Used to acquire full access to
all menus.
10 to 999
156
- - - -
- - - -
- - - -
- - - -
- - - -
[ULoC]
[FCty]
Security Setting Menu
[Code]
[CodE]
Security Setting
Public Key
If Rolling Password turned on,
generates a random number
when power is cycled. If Roll-
ing Password is off fixed num-
ber will be displayed.
Customer Specific
0
- - - -
- - - -
- - - -
- - - -
- - - -
[pass]
[PASS]
Security Setting
Password
Number returned from calcu-
lation found in Features sec-
tion under Password Security.
-1999 to 9999
0
- - - -
- - - -
- - - -
- - - -
- - - -
Note: Some values will be rounded off to fit in the four-character display . Full values can
be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set