Initial preheat, Preheat, Idle – Watlow MINICHEF Deep Fat Fryer Application User Manual
Page 103: 100f, Ready, Pre-`] [`heat, 50`f, I n i, H e f
A p p l i c a t i o n 1 9
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
1 0 1
Five Second Timeout
When using the up or down keys to change a value, if you do not press any key for 5
seconds, the controller will automatically be set to the last value on the display and
return to [`idle].
Initial Preheat
At power-up, the unit will preheat to the temperature value set in the Configuration
Mode [Etype] / [preHt]. The display will show [Pre-`] [`HEat] followed by oil tem-
perature as the oil heats.
When the unit reaches initial preheat temperature, [Ready] will flash once on the dis-
play and an audible tone will sound for 2 seconds. Then [`idle] will appear on the
display. If Real Time Clock option is installed and [setUp] / [Cloc`] is set to
[``yes], the time of day will appear on the display.
Preheat
If in the Configuration Mode [SEtUP] / [ready] has been set to yes, the controller will
detect temperatures and preheat to operating temperature (above relative set point
minus the ready band) as required.
•
Activate the manual menu by pressing the Start/Stop key.
If the fryer is not at operating temperature, it will preheat. Meanwhile:
The word [Pre-`] [`Heat] will appear on the display for a few moments. The
Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will
be displayed until the operating temperature is reached.
The heat output indicator light - G, just below the display- will light up whenever
the controller is calling for heat.
When the fryer is at operating temperature (above relative set point minus the
ready band) [ready] will appear on the display and the Start/Stop key indicator
light will flash rapidly. You are now ready to cook with the active menu.
If the fryer is at operating temperature, the display goes directly to [ready] with-
out indicating preheat or temperature.
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]
D
E
C
F
M
INI
C
HEF
2000
[`50`f]
Edit
Accept
Back-Up
Exit
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
A
B
G
H
A
B
G
H
D
E
C
F
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
A
B
G
H