Step 8 operate the controller, Summary of key functions in operation mode, Startup – Watlow MINICHEF Deep Fat Fryer Application User Manual
Page 42: Initial preheat, Preheat, Idle, 100f, Ready, Pre-`] [`heat, 50`f
4 0
■
Wa t l o w M
I N I
C
H E F
2 0 0 0
A p p l i c a t i o n 1 3
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A
Menu 1
B
Menu 2
C
Menu 3
D
Menu 4
E
Menu 5
F
Menu 6
Startup
1. Apply power to the fryer and add cooking oil if necessary.
Initial Preheat
At power-up, the unit will preheat to the temperature value set in the Configuration
Mode [Etype] / [preHt]. The display will show [Pre-`] [`HEat] followed by oil tem-
perature as the oil heats.
When the unit reaches initial preheat temperature, [Ready] will flash once on the dis-
play and an audible tone will sound for 2 seconds. Then [`idle] will appear on the
display. (If Real Time Clock option is installed and [setUp] / [Cloc`] is set to
[``yes], the time of day will appear on the display).
Preheat
If in the Configuration Mode [SEtUP] / [ready] has been set to yes, the controller will
detect temperatures and preheat to operating temperature (above relative set point
minus the ready band) as required.
•
Activate the menu by pressing the Start/Stop key.
If the fryer is not at operating temperature, it will preheat. Meanwhile:
The word [Pre-`] [`Heat] will appear on the display for a few moments. The
Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will
be displayed until the operating temperature is reached.
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]
D
E
C
F
M
INI
C
HEF
2000
[`50`f]
Edit
Accept
Back-Up
Exit
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
A
B
G
H
A
B
G
H
D
E
C
F
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
A
B
G
H