Asante Technologies 480 - Manual (Page 124)

Format port-all Storm-Control broadcast-multicast <value>
Mode Global Config
4) port-all storm-control broadcast-unknown
This command configures storm control for broadcast and unknown unicast.
Format port-all storm-control broadcast-unknown <value>
Mode Global Config
5) port-all storm-control all-cast
This command configures storm control for broadcast, multicast and unknown
unicast.
Format port-all Storm-Control all-cast <value>
Mode Global Config
10.4.15 qos commands
10.4.15.1 qos qos-advanced
Configure qos advanced mode.
1) qos qos-advanced DSCP
This command enables DSCP mode.
Format qos qos-advanced DSCP
Mode Global Config
2) qos qos-advanced ip_precedence
This command enables IP Precedence mode.
Format qos qos-advanced ip_precedence
Mode Global Config
3) qos qos-advanced none
This command disables qos advanced mode.
Format qos qos-advanced none
Mode Global Config
32
10.4.15.2 qos cos
This command configures 802.1p priority queue mapping.
Format Qos cos priority <0-7> queue <1-4>
Mode Global Config
10.4.15.3 qos dscp
This command specifies dscp value to queue mapping.
Format Qos dscp <0-63> queue <1-4>
Mode Global Config
10.4.15.4 qos port-based
This command configures port-based priority mapping.
Format qos port-based port <WORD>status {enable | disable}
Mode Global Config
10.4.15.5 qos scheduling
Configure qos scheduling mode.
1) qos scheduling strict
This command sets to strict priority.
Format qos scheduling strict
Mode Global Config
2) qos scheduling wrr
This command sets to Weight Round-Robin.
Format qos scheduling wrr
Mode Global Config
10.4.15.6 qos ip-precedence
This command configures IP precedence queue mapping.
Format qos ip-precedence <0-7> queue <1-4>
Mode Global Config
10.4.15.7 qos wrr
This command configures queue weight for weight round robin.
Format qos wrr weight <1-15> queue <1-4>
124 Asante IntraCore IC39240/480 User’s Manual