Asante Technologies 480 - Manual (Page 29)

Switch(Config)# interface 1
Switch(Interface 1)# ?
exit Exit current shell
dot1x Configure 802.1x mode
lacp Configure port LACP mode
addport Add one port to a LAG group
delport Remove a port from a LAG group
lldp Configure lldp port level settings
admin-mode Configure administrative mode on a port
auto-negotiate Configure auto-negotiate mode on a port
speed Configure port phy parameter
flow-control Configure port flow control
port-security Configure port security
qos Configure port-based QoS priority mapping
rate-limit Configure rate limit on a port
storm-control Configure storm control on a port
rmon-counter Configure RMON counter capability on a port
set Configure an IGMP router port
spanning-tree Configure port spanning-tree
vlan Configure VLAN properties on a port
interface Change to another interface
Switch(Interface 1)#
To exit interface configuration mode and return to global configuration mode, enter the exit command. To exit
configuration mode and return to top mode, use the exit command.
4.4 Advanced Features Supported within the Command Mode
Enter a question mark (?) at the system prompt to display a list of commands available for each command mode. You
can also get a list of any command's associated keywords and arguments with the context-sensitive help feature.
29 Asante IntraCore IC39240/480 User’s Manual