Asante Technologies 480 - Manual (Page 129)

10.4.110.8 spanning-tree mst
Configure a multiple spanning tree instance.
1) spanning-tree mst instance
This command creates or removes a MST instance
spanning-tree mst instance add
This command creates a MST instance.
Format spanning-tree mst instance add vlan <vlan list> mstpid <MST ID>
Mode Global Config
e.g. Switch(Config)# Spanning-Tree mst instance add vlan 2-5 mstpid 2
Switch(Config)# Spanning-Tree mst instance add vlan 6 mstpid 3
spanning-tree mst instance delete
This command removes the last MST instance.
Format spanning-tree mst instance delete
Mode Global Config
2 )spanning-tree mst vlan
This command adds or deletes vlan frome a MSTP instance.
spanning-tree mst vlan <MST ID> <vlan list> add
This command creates a MST instance.
Format spanning-tree mst vlan <MST ID> <vlan list> add
Mode Global Config
e.g. Switch(Config)# Spanning-Tree mst vlan 3 3-5 add
Spanning-Tree mst vlan <MST ID> <vlan list> delete
This command deletes a vlan from a MST instance.
Format Spanning-Tree mst vlan <MST ID> < vlan list> delete
Mode Global Config
38
3) spanning-tree mst bridgepri
This command configures bridge priority for a MST instance.
Format spanning-tree mst bridgepri <MST ID> <priority>
Mode Global Config
4) spanning-tree mst cost
This command configures port path cost in a MST instance.
Format spanning-tree mst cost <MST ID> <path cost> ports <port list>
Mode Global Config
5)spanning-tree mst priority
This command configures port priority in a MST instance
Format spanning-tree mst priority <MST ID> <priority> ports <port list>
Mode Global Config
10.4.20 User commands
This command changes user password.
Format user password
Mode Global Config
10.4.21 Interface commands
This command enters into configure interface mode.
Format Interface <port-ID>
Mode Global Config
10.4.22 rmon
This command is used to configure RMON.
10.4.22.1 rmon event
This command creates rmon event entry.
Format rmon event index < 1..65535 > desc <WORD> event <1..4>
community <WORD>owner<WORD>
Mode Global Config
e.g. Switch(Config)# rmon event index 1 desc 123 event 4 community 123
owner test
10.4.22.2 rmon alarm
129 Asante IntraCore IC39240/480 User’s Manual