Yokogawa 2-Wire Dual Channel Transmitter/Analyzer FLXA21 - Manual (Page 13)

<2. Operation>
11
IM 12A01A02-12E 4th Edition : Sep. 3, 2013-00
2. Operation
When all wiring is completed, turn on the power to the instrument. Make sure that the LCD
screen turns on, and then wait for the Quick Setup menu to be displayed. Follow the on-screen
instructions for set-up and calibration. If the instrument is not configured correctly an error
indicator may be displayed, or the measurement values displayed may be incorrect. Consult the
Instruction Manual supplied on CD with the analyzer, and check the initial settings and change
them to suit your purpose.
Basic operation of the software is similar the EXAxt 450 series. For more detailed information
please refer to the instruction manual.
2.1 Change language
The default language setting for the FLEXA is English. To select a different language other than
English, follow the steps below.
Start quick setup?
Yes
No
Change language
Quick setup
Chinese
Czech
English
French
German
Italian
Japanese
Korean
Portuguese
Russian
Spanish
Change language
Chinese
Czech
English
French
German
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish
The instrument will restart
Are you sure?
Yes
Warning
2.2 Quick setup
The Quick setup menu is used to program the basic items necessary to make the transmitter
operational, such as the date/time and sensor settings. The detailed settings are described in
chapter 5, Commissioning in the instruction manual. Each time the FLXA21 is started up, this
menu is displayed. If it is not necessary to change the setup you may bypass the Quick setup, by
selecting No or . When no operation is performed for 10 minutes, the screen changes to the main
display (or home display) automatically.
Start quick setup?
Yes
No
Change language
Quick setup
6.35
Tag:FLXA21–PH
24.9
4mA 20mA PH1
°C
24 mV
pH
Tag:FLXA21–PH
25.0 °C
19 mV
pH
10.38