Yokogawa Button Operated DX2000 - Manual (Page 7)


IM 04L42B01-02E
• Please store the original media containing the software in a safe
place.
• Reverse engineering, such as decompiling of the software, is
strictly prohibited.
• No portion of the software supplied by YOKOGAWA may be
transferred, exchanged, or sublet or leased for use by any third
party without prior permission by YOKOGAWA.
Handling Precautions of the DX
• Use care when cleaning this instrument, especially its plastic
parts. Use a soft dry cloth. Do not use organic solvents, such
as benzene or thinner, or other cleansers. They may cause
discoloring and deformation.
• Keep electrically charged objects away from the signal terminals.
If you do, the DX may malfunction.
• Do not apply volatile chemicals to the display, panel keys, etc.
Do not allow rubber and vinyl products to remain in contact
with the DX for long periods of time. If you do, the DX may
malfunction.
• When not in use, make sure to turn OFF the power switch.
• If there are any symptoms of trouble such as strange odors or
smoke coming from the DX, immediately turn OFF the power
switch and the power supply source. Then, contact your nearest
YOKOGAWA dealer.
Handling Precautions of the External Storage
Medium (CF Card)
• Use caution in the handling of the external storage medium as it
is a delicate product.
• Write operation to storage media may fail under high-
temperature or low-temperature environments. If you are using
the DX in a low-temperature environment (around 10°C or
less), use the DX after the warm-up time (at least 30 minutes)
has elapsed. If you are using the DX under a high-temperature
environment (around 40°C or more), it is recommended that the
external storage medium be inserted into the drive when saving
the data and be removed after the data storage operation is
finished.
• Remove the storage medium from the drive when turning the DX
ON/OFF.
• Touching the compact flash section when static electricity is built
up on the human body can lead to erroneous operation.
• For the general handling precautions of the external storage
medium, see the instruction manual that came with the external
storage medium.
CAUTION
• Do not eject the external storage medium while the access
indicator is illuminated. This can damage the data.
• Do not access the storage medium in a place with vibrations or
shock. The storage medium or drive may malfunction.
Checking the Contents of the Package
Unpack the box and check the contents before operating the
instrument. If some of the contents are not correct or missing or
if there is physical damage, contact the dealer from which you
purchased them.
DX2000
A name plate is located on the top panel of the DX (side panel on
models with the /H5[ ] option). Check that the model name and
suffix code given on the name plate match those on your order.
Name plate
SUFFIX
SUPPLY
FREQUENCY
NO.
STYLE
H S
MODEL
NO. (Instrument Number)
When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
MODEL and SUFFIX Code
Model Suffix Code Optional
code
Description
DX2004 Daqstation DX2000 4ch, 125 ms (Fast sampling mode 25 ms)
DX2008 Daqstation DX2000 8ch, 125 ms (Fast sampling mode 25 ms)
DX2010 Daqstation DX2000 10ch, 1 s (Fast sampling mode 125 ms)
DX2020 Daqstation DX2000 20ch, 1 s (Fast sampling mode 125 ms)
DX2030 Daqstation DX2000 30ch, 1 s (Fast sampling mode 125 ms)
DX2040 Daqstation DX2000 40ch, 1 s (Fast sampling mode 125 ms)
DX2048 Daqstation DX2000 48ch, 1 s (Fast sampling mode 125 ms)
Internal memory
size -3 Standard memory (400 MB)
External storage media -4 With CF card
Language -2 English/German/French, deg F, and DST
(English version of DAQSTANDARD included)
Options /A1 Alarm output 2 points *1
/A2 Alarm output 4 points *1*11
/A3 Alarm output 6 points *1
/A4 Alarm output 12 points *1*8*11
/A5 Alarm output 24 points *1*2*7*11
/C2 RS-232 interface *3
/C3 RS-422/485 interface *3
/D5 VGA output
/F1 FAIL/status output *2*4*8
/F2 FAIL + alarm output 22 points *1*4*7*11
/H2 Clamped input terminal (detachable)
/H5[ ] Desktop type *5
/M1 Mathematical functions (including the report function) *11
/N1 Cu10, Cu25 RTD input/3 leg isolated RTD
/N2 3 leg isolated RTD *6
/N3 Extended input type (PR40-20, Pt50, etc.)
/P1 24 VDC/AC power supply *5
/R1 Remote control *11
/TPS4 24-VDC transmitter power supply (4 loops) *7
/TPS8 24-VDC transmitter power supply (8 loops) *7*8*11
/KB1 Easy Text Entry (with input terminal) *9*10
/KB2 Easy Text Entry (without input terminal) *9
/USB1 USB interface
/PM1 Pulse input (including remote control and mathematical
function)
*11
/CC1 Calibration correction function
/MC1 External input function *12
/BT2 Multi batch function *13
/CP1 PROFIBUS-DP *3
/AS1 Advanced security function
*1 /A1, /A2, /A3, /A4, /A5, and /F2 cannot be specified together.
*2 /A5 and /F1 cannot be specified together.
*3 /C2, /C3, and /CP1 cannot be specified together.
*4 /F1 and /F2 cannot be specified together.
*5 /H5[ ]
D: Power cord UL, CSA st’d
F: Power cord VDE st’d
R: Power cord SAA st’d
J: Power cord BS st’d
H: Power cord GB st’d
Null (/H5): Only for /P1 model (without power cord)
*6 /N2 can be specified only for DX2010, DX2020, DX2030, DX2040 and DX2048.
*7 /TPS4, /TPS8, /A5 and /F2 cannot be specified together.
*8 If /TPS8 is specified, /A4 and /F1 cannot be specified together.
*9 /KB1 and /KB2 cannot be specified together.
*10 If /KB1 is specified, a remote control terminal (438227) is included.
*11 If /PM1 is specified, /A5, /F2, /M1, and /R1 cannot be specified together.
The combination of /A2/F1 and the combination of /A4/TPS8 cannot be specified together.
*12 /MC1 can be specified only for the DX2010, DX2020, DX2030, DX2040, and DX2048.
*13 /BT2 can only be specified for the DX2010, DX2020, DX2030, DX2040, and DX2048.