Yokogawa Button Operated DX2000 - Manual (Page 94)

92
IM 04L42B01-02E
Setup Items and Default Values
Communication (Ethernet) > Modbus client > Basic settings
Setup Item Selectable Range or Selections Default Value Setting
Basic settings > Read cycle 125ms/250ms/500ms/1s/2s/5s/10s 1s
Basic settings > Retry interval Off/10s/20s/30s/1min/2min/5min/10min/
20min/30min/1h 2min
Communication (Ethernet) > Modbus client > Modbus server settings
Setup Item Selectable Range or Selections Default Value Setting
Server number 1-8/9-16 1-8
Port
Modbus server name
Unit
No. 0 to 65535
64 characters or less
Auto/Fixed
0 to 255 502
–
Auto
1
Communication (Ethernet) > Modbus client > Command settings
Setup Item Selectable Range or Selections Default Value Setting
Client command number 1-8/9-16 1-8
1 to 16
First
Last
Server
Regi.
Type Off/R/R-M/W/W-M/E-M *3
Depends on the command type.
Depends on the command type.
1/2/3/.../15/16
Numerical value
INT16/UINT16/INT32_B/INT32_L/UINT32_B/
UINT32_L/FLOAT_B/FLOAT_L
Off
–
–
1
30001
INT16
Communication (Ethernet) > Modbus client > Auto settings
Automatically assigns MW100s to the DX.
Communication (Ethernet) > Password management > KDC connection (/AS1 option) *3
Setup Item Selectable Range or Selections Default Value Setting
KDC connection Primary/Secondary Primary
KDC server name 64 characters or less –
Port number 0 to 65535 88
Communication (Ethernet) > Password management > Certification key (/AS1 option) *3
Setup Item Selectable Range or Selections Default Value Setting
Host principal 20 characters or less –
Realm name 64 characters or less –
Password 20 characters or less –
Encryption AES128/AES256/ARC4 AES128