Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 6)

iv
IM 04L41B01-65EN
How to Use This Manual
Structure of the Manual
This manual consists of the following five chapters and index.
Chapter Title Content
1 Before using the
DAQSTANDARD
Explains the PC system environment required for use of the
DAQSTANDARD. Also explains how to install it.
2 Viewing and
Creating Setup Data
Explains how to view DX100P/DX200P setup data and how to
create new setup data.
3 Receiving and
Sending Setup Data
Explains how to connect to a DX100P/DX200P through the
Ethernet interface and how to send and receive setup data.
4 Troubleshooting Gives a list of error messages and corrective measures.
Index Gives a list of important terms used in this manual.
Range of Explanation in this Manual
This manual does not explain the basic operations of your PC's operating system (OS).
For such descriptions, refer to the Windows User’s Guide etc.
Conventions Used in This Manual
• Unit
K .................... Indicates “1024”. (Example: 100 KB)
• Menus, commands, dialog boxes and buttons
Enclosed in [ ].
• Note
Provides useful information regarding operation of the software.
About Images
The images that appear in this manual may be different from those that appear on the
software, but not to a degree that interferes with procedural explanations.
Products Covered in This Manual
In this manual, the terms “DX100P” and “DX200P” refer to the following models.
Terms Models
DX100P DX100P DX102P, DX104P, DX106P, and DX112P with release number 4
and later
DX200P DX200P DX204P, DX208P, DX210P, DX220P, and DX230P with release
number 4 and later
Revision History
Edition Additions and Changes
1 New edition.
2 Changes to the operating environment (support for Windows 7). Improvements to
descriptions.
3 Changes to the operating environment (Support for Windows XP SP2 is terminated).
4 Changes to the operating environment (Support for Windows 2000 is terminated, and
support for Windows 8).