Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 13)

2.2-1 Program control display
IM 04L31Q01-04E 10
When some program patterns are running
From the menu, - [program], program pattern screen can be switched when some program
patterns are running.
Figure 9 Program operation screen 2
(1) Program pattern no. display: Running program pattern no.s are displayed.
Program pattern no. screen switching: Select a program pattern no. you wish.
Note
- When you run some program patterns simultaneously, the operation screen of first starting pattern
is displayed in the CX Operator.
- Program pattern no. display is available for CX1000/CX2000 ver3.07 or later.
(1) Program pattern no. display