Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 9)

IM 04L31Q01-04E 6
2.1 CX Operator Display
After succeeding communication with CX, the connected CX display screen is displayed.
Figure 3 CX Operator operation display
Control Tool Bar
Click View (check “Control tool bar”) and the icons display ON/OFF of control/ trend/digital/bar/
overview/snapshot can be selected.
Note
• Even when CX display is control operation screen after up and run of CX, the operation for each loop can not
be executed until selecting control group.
• The displayed error message number below the screen corresponds to the error message number of
CX1000/CX2000. The message displays until operating the control parameters.
Chapter 2 CX Operator Operation (Login by an administrator level)
(1) Control tool bar