Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 7)

IM 04L31Q01-04E 4
1.5 Login
CX Login procedure:
1. Open CX Login window by clicking (1) icon or selecting login from file menu.
2. Select CX host name that you have registered in 1.4 chapter.
3. Enter User Name and Password (see the below Note).
4. When CX Login settings are set, click [OK]. To cancel the settings, click [Cancel].
After succeeding the communication, CX control screen will be displayed.
Note
• For login by administrator level, which allows to operate CX parameters and monitor screen
switching):
not use Ethernet login function of CX Æ Input “admin” for username and leave blank for password.
use Ethernet login function of CX Æ Input the registered username and password for administrator
level in CX.
• For login by user level, which allows to display digital values of measurement/control data:
not use Ethernet login function of CX Æ Input “user” for username and leave blank for password.
use Ethernet login function of CX Æ Input the registered username and password for user level
in CX.
Figure 2 CX IP address setting
(1) Login (2) Config