Setting up the wt1600, Setting up the ethernet interface (tcp/ip) – Yokogawa DAQWORX User Manual
Page 33
33
IM WX1000-01E
Operation Guide
Appendix
Installation Guide
Setting Up the WT1600
Setting Up the Ethernet Interface (TCP/IP)
With DHCP, the IP address, subnet mask, default gateway, and DNS are
automatically configured.
Note
• The IP address, subnet mask, default gateway, and DNS can be automatically
specified by using DHCP.
• To use DHCP, the network must have a DHCP server.
• Consult your network administrator to see if DHCP can be used.
• If you use DHCP, a different IP address may be assigned every time the WT1600 is
powered up. You must be careful when using the FTP server function of the WT1600.
To exit the menu during operation, press ESC.
1.
Press MISC to display the Misc menu.
2.
Press the Next 1/2 soft key to display the Next 2/2 menu.
3.
Press the Network soft key to display the Network menu.