Yokogawa DAQWORX - Manual (Page 49)

49 IM WX1000-01E
Operation Guide
Appendix
Installation Guide
Acquiring Data from the Temperature Controller, WT1600, MX100 or Recorder on DAQLOGGER
Setting Logging Conditions
14. Choose
Logger > Configuration from the menu bar in the manager
window.
15. Set data logging conditions from GateCONTROL, GateWT, and GateMX/
MW, then click OK.
Data logging conditions Save settings then close the dialog box
Start Data Logging
16. Click the SCAN button.
Click
Data is logged from GateCONTROL, GateWT, GateMX/MW, and recorders.