Yokogawa DAQWORX - Manual (Page 35)

35 IM WX1000-01E
Operation Guide
Appendix
Installation Guide
Setting Up the WT1600
Setting the User Name and the Password on WT1600
Entering the User Name and Password of the WT1600
Set the user name and password of the WT1600 on GateWT also.
1. The procedure is the same as steps 1 through 3 of “Setting Up the Ethernet
Interface (TCP/IP).”
2. Press the User Account soft key to display the User Account dialog box.
Setting the User Name
3. Turn the jog shuttle to select User Name.
4. Press SELECT to display the keyboard.
5. Use the keyboard to enter the user name.
When not restricting the access, specify anonymous. If you specify
anonymous, you do not have to set the password.
Setting the Password
(If you set user name to anonymous in step 5, you do not have to set the
password.)
6. Turn the jog shuttle to select Password.
7. Press SELECT to display the keyboard.
8. Use the keyboard to enter the password.
Set on GateWT