Yokogawa µR20000 - Manual (Page 35)

2-22
IM 04P01B01-61E
Batch (/BT1 Option)*
* Function available on recorders with firmware version 1.31 or later.
This appears when batch function is enabled (see page 2-33) in Basic Setting mode.
Click here (or choose [Setting] > [SET [Regular] Setting] > [Batch])
Click the text box and enter the text.
Click twice to unselect the line.
Drag the pointer while holding down the left mouse button to select multiple lines.
Copies/Pastes the text.
Displayed only for
End and End2.
Set the contents of the start printout and end printout.
The Start2 and End2 tabs are valid when Dual Comment is enabled in Basic Setting
mode.
Batch No.
Enter the batch number using up to 26 characters.
The characters that can be used are as follows (see section 2.12):
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
2 , 3 , and .), and space
Lot No.
This appears when Digit of lot number is specified (see page 2-33) in Basic Setting
mode.
Set the number in the range of 0000 to 9999 or 000000 to 999999. Digit of lot number is
set in Basic Setting mode.
Batch Comment
Set the batch comment using up to 32 characters by 5 lines (µR10000) or 64 characters
by 5 lines (µR20000).
The characters that can be used are as follows (see section 2.12):
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
2 , 3 , and .), and space
Batch Printout
• Batch Name
On: Prints the batch name.
• Chart Speed
On: Prints the chart speed.
• Date/Time
On: Prints the date and time.
2.6 Setting the Items in Setting Mode and the Data Display Method