Yokogawa PR300 Power and Energy Meter User Manual
Page 12
<Toc> <Ind>
<2. Configuring the Power and Energy Meter>
2-3
2.3 Receiving the Setup Data or Creating New
Setup Data
The following three methods are available for starting to create setup data.
• Receive the setup data of the power and energy meter.
• Open a setup data file.
• Create new setup data.
Receiving the Setup Data of the Power and Energy Meter
Before carrying out the following procedure, check to see that the communication mode
and parameters are set correctly. For details, see Section 2.2, “Setting the
Communication Mode for Connecting to the Power and Energy Meter.”
1
. From the Communication menu, choose Receive Setting. You can also click the
Receive Setting icon on the toolbar. A confirmation dialog box for receiving settings
opens.
2
. Click OK.
The reception starts. When the reception of the settings is complete, a message
appears to indicate it.
3
. Click OK.
IM 77C01Y01-01E