Yokogawa PR300 Power and Energy Meter - Manual (Page 18)

<Toc> <Ind> <2. Configuring the Power and Energy Meter>
2-9
Sending the Display Pattern Setting (For the PR300 Only)
Send the display pattern setting data to the device.
1 . Set the display pattern, and then click Send Display Pattern Setting.
A confirmation dialog box for sending the setting opens.
2 . Click OK.
The sending starts. When the sending of the display pattern setting is complete
correctly, a message appears to indicate it.
3 . Click OK.
IM 77C01Y01-01E