Yokogawa PR300 Power and Energy Meter - Manual (Page 22)

<Toc> <Ind> <2. Receiving or Setting the Energy Value>
3-1
3. Receiving or Setting the Energy Value
Before carrying out the following procedure, check to see that the communication mode
and parameters are set correctly. For details, see Section 2.2, “Setting the
Communication Mode for Connecting to the Power and Energy Meter.”
1 . From the Communication menu, choose Integral Energy. You can also click the
Integral Energy icon on the toolbar. A confirmation dialog box for receiving setting
opens.
2 . Click OK.
The reception starts. When the reception of the energy value is complete, a
message appears to indicate it.
3 . Click OK.
The received setup data is displayed.
Sending the energy value:
1. Click the item in the Send
Subject.
2. Enter the energy value when
sending the energy value.
3. Click Send.
Figure3.1 Energy Value Reset Screen
Note
Use the energy value setting when the energy value needs to be set to the device in advance.
IM 77C01Y01-01E