American Dryer Corp. ADH-120 - Manual (Page 33)

29
H. FILTER INFORMATION
The filter housing is where the pre-filters and HEPA filters
are contained. On the upper most rails is where the pre-filters
are installed and on the rails below that, the HEPA filters are
installed. The ADH-120 requires two (2) of each pre-filters
and HEPA filters. (ALL filters must be supplied by customer.)
1. Filter Requirement
Filter Description H W D CFM
O
PERATING
T
EMP
Quantity
Pre - filter
24" 24" 2" 1100 300º F
2
60.96 cm 60.96 cm 5.08 cm 31.15 cmm 150º C
HEPA/ULPA
24" 24" 11-1/2"* 1100 300º F
2
60.96 cm 60.96 cm 29.21 cm 31.15 cmm 150º C
Shaded areas are stated in metric equivalents
*Does not include 1/4-inch thick gasket