Nexo PS-R2 - Manual (Page 31)

PS S ERIES HARDWARE SETUP PROCEDURE Page 31/82
7.2 General Description
PS10R2 and PS15R2 incorporate connecting plates (one on PS10R2 and one per side on PS15R2) on
which a comprehensive range of accessories can be mounted.
PS10R2 AND PS15R2 CONNECTING PLATES
There are two families of accessories:
• fixed installation accessories, which are designed to be screwed on the connecting plates;
• touring accessories, which can be installed or removed with quick connecting systems.
7.2.1 WARNINGS ON PS SERIES ACCESSORIES
WARNING 1T
All PS Accessories are specifically rated in agreement with structural computations.
Never use other accessories when installing PS Series cabinets cabinets than the ones
provided by NEXO: NEXO will decline responsibility over the entire PS Series accessory
range if any component is purchased from different supplier.
WARNING 2
All PS Series accessories have been designed so that cabinets are installed as single
standalone speakers.
PS Series assemblies as shown in figure below are UNSAFE and STRICTLY PROHIBITED.
NO
Oblong holes for Touring Applications Accessories
Tapped holes for Fixed Installation Accessories