Nexo RS User Manual

Page 12

Advertising
background image

Page 12/54

RS18

G

ENERAL

I

NSTRUCTIONS

• Insert Spacer between cabinet and Rigging plates.
• Fill each screw hole with Loctite 243 or equivalent.
• Tighten the 6 screws alternately, at the rate of 4 revolutions per screw.

• Fill each screw hole with Loctite 243 or equivalent.
• Insert the 8 handles washers and screws and tight them.

INSTALLING PAINTED RS18 RIGGING PLATES

IMPORTANT

RS18 handles must not be used to fly RS18’s (through illegal use of straps for example)

Advertising
This manual is related to the following products: