Activeforever CL 100-C - Manual (Page 13)

13
3. Place two (2) pieces of bottom foam
inside of the spa.
Use three (3) pieces of foam for 6’
model.
4. Remove label(s) from liner-to-
powerpack union nut.
5. Place the liner
inside the spa.
Unfold, and
line up fittings
with holes in
wall panel.
Push fittings
through holes
in panel and
snap the top of the liner to each of the eight plastic corner pieces.
6. Attach the three (3) feet to the bottom of the
power pack.