Activeforever CL 100-C - Manual (Page 26)

User’s Guide
26
SERVICE & TROUBLE SHOOTING
Your spa was designed to minimize service requirements. If trouble
should arise, carefully go through the steps in the following steps on
trouble shooting. If you still experience a problem, call the dealer or
the manufacturer.
Air Pump Blower
Symptom
Solution
Cannot turn
on the turbo air
pump.
1. Make sure that the power pack is plugged into
the electrical outlet and that there is power to
the outlet. (Plug another electrical item into
the outlet, such as a hair dryer or lamp.) No
power? Check the main breaker at fuse box in the
house.
2. Test the GFCI (at the end of the power cord),
using the instructions in the maintenance section
of this manual. The GFCI light should be on.
If the GFCI is faulty, do not use the spa.
Immediately call your dealer or the factory for
instructions. DO NOT BYPASS THE GFCI!
DO NOT USE THE SPA!
Cannot turn
off the turbo air
pump
Call service center for instructions.
GFCI Trips when
you turn it on
DO NOT USE SPA. Call service center for
instructions
Air pump blower
makes squealing
noise
Turn off pump and call service center for
instructions