ReadyLIFT Hummer H3/H3T SST Lift Kit: 2004-2010, 4WD - 2.25F/1.5"R" - Manual (Page 3)

www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-3070 & 69-3070) H3 Only
Raise and support vehicle on jack stands, locate torsion bars Remove upper shock mounting hardware
Remove lower shock mounting bolt/nut Install spacer underneath bottom shock bushings
Measure threads on top of torsion bar adjusting block Then remove torsion bar adjusting block and bolt
Remove OE torsion key Install new ReadyLIFT forged torsion key