ReadyLIFT Hummer H3/H3T SST Lift Kit: 2004-2010, 4WD - 2.25F/1.5"R" User Manual
Page 4
Note: Torsion bars can be adjusted to
the initial thread measurements on the
adjusting bolts. Once the rear parts are
installed and with the vehicle on the
ground the necessary adjustments can
be made and finalized by the alignment
shop.
Rear Installation
(see below)
Reinstall wheels/tires and torque to spec. Re-
check all work performed and torque all hard-
ware to spec. Test drive and have vehicle
aligned.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-3070 & 69-3070)
Reinstall adjustment bolt and block to original measurements
Remove spare tire in order to remove shackle bolts
Disconnect upper shock mounting bolts
Support axle and disconnect/remove shackles and hardware.
Install new shackles with OE hardware.
Install upper shock extensions and new hardware.