Clearing the ipv6 pim forwarding cache, Clearing the ipv6 pim message counters – Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) User Manual

Page 189

Advertising
background image

Multi-Service IronWare Multicast Configuration Guide

177

53-1003032-02

IPv6 PIM Sparse

2

Syntax: show ipv6 pim [vrf vrf-name] traffic

The vrf parameter allows you to display IPv6 traffic statistics for the VRF instance identified by the
vrf-name variable.

Table 43

displays the output from the show ipv6 pim traffic command.

Clearing the IPv6 PIM forwarding cache

You can clear the IPv6 PIM forwarding cache using the clear ipv6 pim cache command.

Brocade# clear ipv6 pim cache

Syntax: clear ipv6 pim [vrf vrf-name] cache

Use the vrf parameter to clear the IPv6 PIM forwarding cache for a VRF instance specified by the
vrf-name variable.

Clearing the IPv6 PIM message counters

You can clear the IPv6 PIM message counters using the clear ipv6 pim counters command.

Brocade# clear ipv6 pim counters

Syntax: clear ipv6 pim [vrf vrf-name] counters

Use the vrf parameter to clear the IPv6 PIM message counters for a VRF instance specified by the
vrf-name variable.

TABLE 43

Output from the show ipv6 pim traffic command

Field

Description

Port

The port or virtual interface on which the IPv6 PIM interface is configured.

Hello

The number of IPv6 PIM Hello messages sent or received on the interface.

J or P

The number of Join or Prune messages sent or received on the interface.
NOTE: Unlike PIM dense, PIM Sparse uses the same messages for Joins and Prunes.

Register

The number of Register messages sent or received on the interface.

RegStop

The number of Register Stop messages sent or received on the interface.

Assert

The number of Assert messages sent or received on the interface.

Total Recv or Xmit

The total number of IGMP messages sent and received by the device.

Total Discard or chksum

The total number of IGMP messages discarded, including a separate counter for
those that failed the checksum comparison.

Brocade# show ipv6 pim traffic

Port Hello Join Prune Assert

[Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx]

MLD Statistics:

Total Recv/Xmit 356/161

Total Discard/chksum 0/0

Advertising