Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) User Manual

Page 206

Advertising
background image

192

Brocade Virtual ADX Switch and Router Guide

53-1003246-01

Displaying OSPFv3 information

7

For example, to display detailed information about a neighbor with the router ID of 1.1.1.1, enter
the following command at any CLI level:

This display shows the following information:

BDR

The router ID (IPv4 address) of the BDR.

Interface [State]

The interface through which the router is connected to the neighbor. The state of the interface
can be one of the following:

DR – The interface is functioning as the Designated Router for OSPFv3.

BDR – The interface is functioning as the Backup Designated Router for OSPFv3.

Loopback – The interface is functioning as a loopback interface.

P2P – The interface is functioning as a point-to-point interface.

Passive – The interface is up but it does not take part in forming an adjacency.

Waiting – The interface is trying to determine the identity of the BDR for the network.

None – The interface does not take part in the OSPF interface state machine.

Down – The interface is unusable. No protocol traffic can be sent or received on such a
interface.

DR other – The interface is a broadcast or NBMA network on which another router is
selected to be the DR.

TABLE 30

Detailed OSPFv3 neighbor information

Field

Description

Router ID

For information about this field, refer to

Table 29

on page 191.

Pri

For information about this field, refer to

Table 29

on page 191.

State

For information about this field, refer to

Table 29

on page 191.

DR

For information about this field, refer to

Table 29

on page 191.

BDR

For information about this field, refer to

Table 29

on page 191.

Interface [State]

For information about this field, refer to

Table 29

on page 191.

TABLE 29

Summary of OSPFv3 neighbor information (Continued)

Field

Description

Virtual ADX#show ipv6 ospf neighbor router-id 3.3.3.3

RouterID Pri State DR BDR Interface[State]

3.3.3.3 1 Full 3.3.3.3 1.1.1.1 ve 10 [BDR]

DbDesc bit for this neighbor: --s

Nbr Ifindex of this router: 1

Nbr DRDecision: DR 3.3.3.3, BDR 1.1.1.1

Last received DbDesc: opt:xxx ifmtu:0 bit:--s seqnum:0

Number of LSAs in DbDesc retransmitting: 0

Number of LSAs in SummaryList: 0

Number of LSAs in RequestList: 0

Number of LSAs in RetransList: 0

SeqnumMismatch 0 times, BadLSReq 0 times

OnewayReceived 0 times, InactivityTimer 0 times

DbDescRetrans 0 times, LSReqRetrans 0 times

LSUpdateRetrans 1 times

LSAReceived 12 times, LSUpdateReceived 6 times

Advertising