Brocade Virtual ADX Switch and Router Guide (Supporting ADX v03.1.00) - Manual (Page 302)

288 Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Displaying BGP4 information
8
RefreshCapability Whether this device has received confirmation from the neighbor that the
neighbor supports the dynamic refresh capability.
Distribute-list Lists the distribute list parameters, if configured.
Filter-list Lists the filter list parameters, if configured.
Prefix-list Lists the prefix list parameters, if configured.
Route-map Lists the route map parameters, if configured.
Messages Sent The number of messages this device has sent to the neighbor. The display
shows statistics for the following message types:
•
Open
•
Update
•
KeepAlive
•
Notification
•
Refresh-Req
Messages Received The number of messages this device has received from the neighbor. The
message types are the same as for the Message Sent field.
Last Update Time Lists the last time updates were sent and received for the following:
•
NLRIs
•
Withdraws
Last Connection Reset Reason The reason the previous session with this neighbor ended. The reason can
be one of the following:
Reasons described in the BGP4 specifications:
•
Message Header Error
•
Connection Not Synchronized
•
Bad Message Length
•
Bad Message Type
•
OPEN Message Error
•
Unsupported Version Number
•
Bad Peer AS Number
•
Bad BGP4 Identifier
•
Unsupported Optional Parameter
•
Authentication Failure
•
Unacceptable Hold Time
•
Unsupported Capability
•
UPDATE Message Error
•
Malformed Attribute List
•
Unrecognized Well-known Attribute
•
Missing Well-known Attribute
•
Attribute Flags Error
•
Attribute Length Error
•
Invalid ORIGIN Attribute
•
Invalid NEXT_HOP Attribute
•
Optional Attribute Error
•
Invalid Network Field
•
Malformed AS_PATH
•
Hold Timer Expired
•
Finite State Machine Error
•
Rcv Notification
TABLE 41 BGP4 neighbor information (Continued)
This field... Displays...