Shallow well application, Step 2, Step 3 – Burcam 506532SS S.W. STAINLESS STEEL JET PUMP WITH FLUOMAC 3/4HP 115V User Manual
Page 5: Step 4, Step 5, Step 6, Step 7
Advertising
5
SHALLOW WELL APPLICATION
STEP 2
Cut poly pipe
and install the foot valve.
STEP 3
Insert well
seal elbow thru the seal and
attach to pipe.
STEP 4
Install well
seal and piping into well casing.
STEP 5
Install your pump
and thread an adaptor into inlet.
STEP 6
Cut poly
pipe and connect both ends.
Check valve,
close to pump.
Well point optionnal installation
STEP 7
You may install one or more
sand points to increase the supply of water.
Advertising