Choosing a site, Housing your sj silver series jet pump – Davey SJ60-08PC Automatic Water Pressure System User Manual
Page 2
Before installing your new pump, please read all instructions carefully as failures caused by incorrect installation or opera-
tion are not covered by the guarantee. Your SJ Silver Series Jet Pump is designed to handle clean water. The pump should
not be used for any other purpose without specific referral to Davey. The use of the pump to handle flammable, corrosive
and other materials of a hazardous nature is specifically excluded.
WARNING: Some insects, such as small ants, find electrical devices attractive for various reasons. If your pump
enclosure is susceptible to insect infestation you should implement a suitable pest control plan.
~ 2 ~
Congratulations on your purchase of a Silver Series quality pressure pump or water pressure system. All components
have been designed and manufactured to give trouble free, reliable operation.
Model SJ35-04
1.
Delivery outlet - 1” BSP(F)
2.
Suction inlet - 1” BSP(F)
3.
Pump body
4. Motor
5.
Priming port and plug
6.
Drain port and plug
Model SJ35-04P2C/LOP
1.
Delivery outlet - 1” BSP(F)
2.
Suction inlet - 1” BSP(F)
3.
Pump body
4. Motor
5.
Priming port and plug
6.
Drain port and plug
7.
Pressure Switch
8.
Pressure Tank
Model SJ35-04PC & SJ60-08PC
1.
Delivery outlet - 1” BSP(M)
2.
Suction inlet
– SJ35-04PC - 1”BSP(F)
– SJ60-08PC - 1
1
/
4
”BSP(F)
3.
Pump body
4. Motor
5.
Priming port and plug
6.
Drain port and plug
7. Presscontrol
Choosing a Site
Choose a site with a firm base and as close to the water source as possible with
correct power supply. Make sure your pump is always connected to an adequate,
reliable source of clean water.
Housing your SJ Silver Series Jet Pump
To protect your pump from the weather, make sure the cover provided is water proof,
frost free and has adequate ventilation.
The pump should be horizontally mounted on a firm base allowing for drainage, to
avoid damage to flooring etc., that over time may occur from leaking pipe joints or
pump seals. Do not mount the pump vertically.
NOTE: 1” FI x FI suction
check valve and 1” nipple
not illustrated.
Do not use this pump to pump flammable fluids, such as petrol or diesel fuels.